The Advanced Materials Group

Articles

ADMA Products, Inc. Papers and Presentations

Curt Lavender, Yuri Hovanski, K. Scott Weil, Vladimir Moxson, Volodymyr Duz, Orest Ivasishin, “Development of High Strength Titanium Alloy Bar Stock from TiH2 Powder”, to be presented at 2009 TMS Annual Meeting & Exhibition, San Francisco, California, February 15 – 19, 2009

Jane Adams, Vladimir Moxson, Volodymyr Duz, Jason Deters, Craig Niese, Christine Suminski, “Powder Metallurgy Titanium Extrusion Billets for Rod Stock”, to be presented at 2009 TMS Annual Meeting & Exhibition, San Francisco, California, February 15 – 19, 2009

Sami El-Soudani, Oscar Yu, Fusheng Sun, Michael Campbell, Joshua Phillips, Tony Esposito, Vladimir Moxson, Vlad Duz, “Canless Extrusion Process Development for Blended Elemental Powder-Based Titanium Ti-6AL-4V Alloy”, to be presented at 2009 TMS Annual Meeting & Exhibition, San Francisco, California, February 15 – 19, 2009

Dr. Sami M. El-Soudani, The Boeing Company, Dr. Oscar Yu, and Dr. Fusheng Sun, "Canless Extrusion Process Development for Blended Elemental Powder-Based Titanium Ti-6AL-4V Alloy", to be presented at Titanium 2008 24th Annual ITA Conference & Exhibition, Las Vegas, Nevada, September 21-24th 2008

Vlad A. Duz, Orest Ivasishin, Curt Lavender, V. S. Moxson, Vladislav V. Telin “novative Powder Metallurgy Process for Producing Low Cost Titanium and Titanium and Titanium Alloy Components”, to be presented at Titanium 2008 24th Annual ITA Conference & Exhibition, Las Vegas, Nevada, September 21-24th 2008;

Jane W. Adams, Vlad A. Duz, V.S. Moxson, “Titanium Powder Metallurgy for Armor and Structural Applications”, to be presented at Titanium 2008 24th Annual ITA Conference & Exhibition, Las Vegas, Nevada, September 21-24th 2008;

Jane W. Adams, Vlad A. Duz, V.S. Moxson, “Powder Metallurgy Ti-6Al-4V Ballistic Plate Provides An Alternative To Wrought Alloy Plate”, to be presented at 24th International Symposium on Ballistic, New Orleans, LA, Sept 22 – 26, 2008;

Dr. Sami M. El-Soudani, Michael Campbell, Joshua Phillips, Tony Esposito, Dr. Vladimir Moxson, and Dr. Vlad Duz, "Canless Extrusion Process Development for Blended-Elemental Powder-Based Titanium Ti-6AL-4V Alloy", AeroMat 2008, June 23-26, 2008 Austin, Texas

Dr. Sami M. El-Soudani, Dr. Oscar Yu, Dr. Fusheng Sun, Arvind Keskar, Dr. Vladimir Moxson, and Dr. Vlad Duz, "Preliminary Characterization of Processing-Microstructure-Property Relationships for Blended-Elemental, Powder-Based, Canless Titanium 6AL-4V Extrusions", AeroMat 2008, June 23-26, 2008, Austin, Texas

Jane W. Adams, Vlad A. Duz, V.S. Moxson, "Powder Metallurgy is Cost Effective Approach for Manufacturing Armor and Structural Components", PM 2008 World Congress, Washington, D.C., June 8-12, 2008

Jane W. Adams, Vlad A. Duz, V.S. Moxson, "Innovative Direct Powder Rolling Process for Producing Titanium and Titanium Alloy Flat Products from Hydrogenated Titanium Powder", TMS 2008 Annual Meeting, March 9-13, 2008, New Orleans, Louisiana

Jane W. Adams, Vlad A. Duz, V.S. Moxson, "Low Cost Blended Elemental Titanium Powder Metallurgy for Armor and Structural Components Manufacturing", Defense Manufacturing Conference, Las Vegas, Nevada, December 3-6, 2007.

Jane W. Adams, Walter N. Roy, Vlad A. Duz, V.S. Moxson, "Low Cost Blended Elemental Titanium Powder Metallurgy", Titanium 2007, 23rd Annual ITA Conference & Exhibition, Orlando, Florida, October 7-9, 2007.

Mark Pitkin, Grigory Raykhtsaum, John Pilling, Oleg V. Galibin, Mikhail V. Protasov, Julie V. Chihovskaya, Irina G. Belyaeva, Miralda I. Blinova, Natalia M. Yudintseva, Igor L. Potokin, George P. Pinaev, Vladimir Moxson, Vladimir Duz, "Porous Composite Prosthetic Pylon for Integration with Skin and Bone", Journal of Rehabilitation Research & Development, Vol. 44, No. 5, 2007, pp. 1-16

V.S. Moxson, V.A. Duz, "Low Cost Titanium Powder Metallurgy Products", 2007 SAE Aero Tech Congress, September 17-20, 2007, Los Angeles, CA

Pitkin M., Raykhtsaum G., Moxson V., Duz V., "Composite Pylon for Bone-Skin Attachment of Limb Prostheses", 12th World Congress of the International Society for Prosthetics and Orthotics, Vancouver, Canada, July 29 - August 3, 2007.

Vladimir S. Moxson, Vlad A. Duz, "Recent Developments in Titanium Powder Metallurgy", 2007 World Titanium Conference, June 3-7, 2007, Kyoto, Japan.

Orest M. Ivasishin, Dmytro G. Savvakin, Vladimir S. Moxson, Vladimir A. Duz, Curt Lavender, "Production of Titanium Components from Hydrogenated Titanium Powder: Optimization of Parameters", 2007 World Titanium Conference, June 3-7, 2007, Kyoto, Japan

Jane W. Adams, Walter N. Roy, Stephen Luckowski, Vlad A. Duz, V.S. Moxson, "Titanium Powder Metallurgy Composite Materials for Armor and Structural Applications" TMS 2007, February 25 - March 1, 2007, Orlando, Florida.

Vladimir A. Duz, V.S. Moxson, Russel Chernenkoff, William F. Jandeska Jnr and Jean Lynn, "Blending an Elemental Approach to Volume Titanium Manufacture", Metal-Powder Report/Automotive Layout, November 2006, pp.16-21

V.A. Duz, V.S. Moxson, R. Chernenkoff, W. Jandeska, Jean Lynn, "Low-Cost Powder Metallurgy Ti-6All-4V Components for Automotive Application", PowderMet 2006/MPIF June 18-21, San Diego

Jane W. Adams, Walter N. Roy, Vlad A. Duz, V.S. Moxson, "Low Cost Titanium Powder Metallurgy Components for Armor and Structural Applications", Titanium 2006, October 1-3, San Diego, CA

O. M. Ivasishin, D. G. Savvakin, V. S. Moxson, V. Duz, A. N. Petrunko, F. H. Froes, C. A. Lavender, "Synthesis of Powder Metallurgy Titanium Using Hydrogenated Titanium" AEROMAT 2006 May 15-18, Seattle

Vlad A. Duz, V.S. Moxson, Orest M. Ivasishin, D.G. Savvakin "Innovative Direct Powder Rolling Process for Producing Titanium and Titanium Alloy Flat Products from Hydroggenated Titanium Powder", TMS-2006, San-Antonio, TX, March 12-16, 2006

O.M. Ivasishin, D.G. Savvakin, I.S. Bielov, V.S. Moxson, V.A. Duz, R. Davis, C. Lavender, "BEPM Synthesis of Ti-6Al-4V Alloy Using Hydrogenated Titanium"", EURO PM 2005, Praque, Check Republic, October 2 – 5, 2005.

Jane W. Adams, Walter N. Roy, Vlad A. Duz, V.S. Moxson "Low Cost Titanium Components for Armor and Structural Applications" International Titanium Conference 2005, Scottsdale, AR, September 23-27, 2005

Vlad A. Duz, V.S. Moxson "The Direct Powder Rolling Process for Producing Titanium and Titanium Alloy Foils, Sheets and Plates", Material Science & Technology 2005, Pittsburgh, PA, September 25-28, 2005

O.M.Ivasishin, D.G.Savvakin, I.S.Bielov, V.A. Duz, V.S. Moxson, "BEPM Synthesis of Ti-6Al-4V Alloy Using Hydrogenated Titanium", Materials Science & Technology 2005, Pittsburgh, PA, September 25-28, 2005

Vladimir S. Moxson, Volodymyr A. Duz, "Powder Metallurgy of Gamma Titanium Aluminides", 2005 International Conference on Powder Metallurgy & Particulate Materials, Montreal, Canada, June 19 - 23, 2005.

Orest M. Ivasishin, Dmitro G. Savvakinm Vladimir S. Moxson, Vlad A. Duz, F.H. Froes, Rich Davis, "Low-Cost PM Titanium Materials for Automotive Applications", TMS-2005, 134th Annual Meeting & Exhibition, San Francisco, CA, February 13-17, 2005.

V.S. Moxson, "Low-Cost Weldable Plate from Titanium/Titanium Alloy Powder", Defense Manufacturing Conference’04, Las Vegas, Nevada November 29 - December 2, 2004, p35.

F.H. (Sam) Froes, V.S. Moxson, V.A. Duz "Titanium Powder Metallurgy - Automotive and More", 2004 International Conference on Powder Metallurgy & Particulate Materials, Chicago, June 13-17, 2004.

V.A. Duz, V.S. Moxson, , F.H. (Sam) Froes, F. Sun, J.S. Montgomery, "Powder Metallurgy Ti-6Al-4V Components Produced from Low Cost Blended Elemental Powders by Hot Pressing", TMS-2004, Charlotte, North Carolina, March 14-18, 2004.

V.S. Moxson, V.A. Duz, J.S. Montgomery, F.H. (Sam) Froes, F. Sun, "Blended Elemental Powder Metallutgy Approach to Produce Gamma Titanium Aluminides and Composite Ti-6Al-4V/TiAl/Ti-6Al-4V Structures", TMS-2004, Charlotte, North Carolina, March 14-18, 2004.

V.S. Moxson, V.A. Duz, J.S. Montgomery, F.H. (Sam) Froes, F. Sun, "Light Weight Powder Metallurgy Titanium-Magnesiun-Aluminum Composites for Structural Applications", TMS-2004, Charlotte, North Carolina, March 14-18, 2004.

F.H. (Sam) Froes, S.J. Mashl, V.S. Moxson, J.C. Hebeisen, and V.A. Duz, "The Technologies of Titanium Powder Metallurgy" (Overview) , JOM, November 2004, pp. 46-48.

V.S. Moxson, V.A. Duz, F. Sun, and F.H. (Sam) Froes, "Optimizing Fatigue Performance in Titanium Automotive Components", Presented at 2003 International Conference on Automotive Fatigue Design & Applications, Novi-Michigan, October 28-29, 2003.

V.A. Duz, V.S. Moxson, F. Sun, K. Sumranthin, and F.H. (Sam) Froes, "Microstructural Control in Titanium Powder Metallurgy Products", presented at the Twelfth Symposium on Processing and Fabrication of Advanced Materials XII, Pittsburgh, PA, 13-15 October 2003.

F.H. (Sam) Froes, V.S. Moxson, C.F. Yolton, and V.A. Duz, "Titanium Powder Metallurgy in Aerospace and Automotive Components", Presented at 2003 International Conference on Powder Metallurgy & Particulate Materials, Mandalay Bay - Las Vegas, June 8-12, 2003.

F.H. (Sam) Froes, V.S. Moxson, F. Sun, C. Darney, and V.A. Duz, "Making Titanium Cost Affordable", AeroMat, Seattle, 2003.

V.S. Moxson, Fusheng Sun, V. Duz, and F.H. (Sam) Froes, "Cost Effective Production of Powder Metallurgy Gamma Titanium Aluminide Composite Plate", 3rd International Symposium on Gamma Titanium Aluminides, TMS Proceedings, 2003;

F.H. (Sam) Froes, O.M. Ivasishin, D.G. Savvakin, V.S. Moxson, K.A. Bondareva, A.N. Demidik, "Cost-Effective Synthesis of Ti-6Al-4V Alloy Components Produced via the P/M Approach" presented at the 2002 TMS Fall Meeting, Oct. 6-10, 2002.